Cooling Coils | KINFOLK

TYPE OF COILS WE MANUFACTURE

Evaporator Coil (DX)

Chilled Water Coil (CWC)

Chilled Water Coil (CWC)

KINFOLK DX evaporator coils are designed from 2 rows upto 10 rows with the widest range of circuiting control and splits available in practice.

DX Coils are often used in Air Handlers or built up systems or just stand alone in ductwork. Often, multiple compressors are connected to the same DX coil and require capacity control.

KINFOLK uses a intertwined circuiting to allow the use of full face area for uniform distribution of the refrigerant. In addition, you can also select from the face splits or row splits for 2, 3 or even 4 compressors on the same coil.

Chilled Water Coil (CWC)

Chilled Water Coil (CWC)

Chilled Water Coil (CWC)

KINFOLK Chilled water coils are designed from 4 rows upto 12 row with 1/2" or 5/8" copper tubes for both HVAC or process requirements.

We are totally flexible in the design of coils and offer a wide range of circuiting patterns, fin spacings, rows and connection arrangements. The perfect coil design balances high efficiency performance with acceptable waterside and airside pressure drops.

KINFOLK also builds glycol coils for ethylene or propylene. Many of these applications are for process or heat recovery applications.

Steam Coil (STC)

Hot Water Coil (HWC)

Hot Water Coil (HWC)

KINFOLK Steam coils are designed from 1 row upto 4 rows with 5/8" or 1" tubes made of copper or copper-alloy or SS depending on the application.

KINFOLK coils are designed in such a way that the condensate doesn’t collect in the coil. Most standard steam coils are opposite end connected and pitched within the casing to expedite condensate removal. It’s also possible to build same end standard steam coils.

Hot Water Coil (HWC)

Hot Water Coil (HWC)

Hot Water Coil (HWC)

KINFOLK Hot Water coils are designed from 2 row upto 4 rows with 1/2" or 5/8" tubes made of copper or copper-alloy or SS.

Hot Water Duct Booster Coils are built with either 1” flanges on all four sides for easy duct mounting or slip & drive casings for insertion into duct. These coils are also designed to maintain RH in industrial and process areas.

Highly efficient HVAC coils for your needs

High Enthalpy Configuration

What details we need to design a high performance coil?

What details we need to design a high performance coil?

All cooling coils are intended to remove sensible heat and in the process it removes some moisture based on the psychrometric properties of the air.
KINFOLK HEC coils are designed keeping the core psychrometric properties to target the maximum moisture removal from air as per the requirement for any process needs or storage needs.
KINFOLK HEC coils are designed with optimal (less) air velocity across the coil, more surface area for maximum heat transfer and increased redundant time of air passing through the coil.

What details we need to design a high performance coil?

What details we need to design a high performance coil?

What details we need to design a high performance coil?

Application for which the coil is to be used
Temperature of the area to which the coil serves
Ambient air temperature
Coil inlet air temperature
Coil outlet temperature required (if specific)
Media : Refrigerant / water /steam
Evaporating temperature / Water temperature